ERIN, ONTARIO KITCHEN RENOVATION IS COMPLETE | JCB and SONS
Erin Ontario kitchen renovation is complete | JCB & SONS. Dad (aka JCB) came and helped us set the new door jambs we made in the shop and hang the new solid Pine doors we finished in our shop. The trims and doors came to the job site after being sanded and 5 coats of finish completed really bring out the richness of the wood grain. JCB is mortising the new
latches in here.
The new Pine 6 Panel doors installed and trimmed!
Here are some pictures of the completed kitchen. We are making a custom made Hutch to go in the U shaped wall in the left of this picture. Stay tuned for that!
Once the Hutch is in we will be able to install the last of the baseboard on this U shaped wall that we built this custom
to hold our customers new painting. We had
The Old Barn Polished Stone Creations
make the beautiful stone sill for the niche.
We installed a beautiful Marble backslash in the new kitchen to really finish off the project!
We completely redid this extremely tiny 2 piece bathroom, including finding a very special hanger to mount this handmade mirror our customer recently brought back from her trip to Italy.
This used to be the workshop. We changed it into a mudroom entrance, adding a new closet, new shelving, new storage cabinet with counter top, and trimming out with new Pine Casing, Baseboard, new Laminate flooring, and new Lighting.
This is off the mudroom and was turned into a tack room for storing the customers saddles and blankets. She added a pull out couch to allow for guests staying if needed.
The green room below was given new
Casement Windows and Patio Door and all new Pine Casing and Baseboard. We also retrofitted the old Pot Lights with new trim kits and LED Lights.
ERIN ONTARIO, PINE BASEBOARD, CASING AND DOORS | JCB and SONS
Erin Ontario, Pine Baseboard, Casing and Doors | JCB & SONS. We have completed the finishing work of Mortising the hinges into the new doors and door jambs. We custom made the door jambs in the shop to fit the wall thickness of this Hillsburg home as they aren't a standard thickness. We cut everything to width and than ran an 1/8" round over profile on the edges of all of the door jambs. All of our Pine doors and Millwork came from
We predrilled all the doors in our shop before finishing with this guided drill boring jig to make sure all the holes are precisely drilled for our new
Door Knobs from
We also custom made some wall plates for the tack room in this home to install the clients new saddle and blanket holders. We made them out of pine and finished them of with a
Edge
The 2-3/4" Colonial Pine Casing from Welbeck Sawmill after a coat of
and a coat of
Ipswich Pine Stain
We use this Door and Jamb Butt Template to mortise the hinges in quickly and accurately with a high level of precision.
Ready for the new hinges!
ERIN, ONTARIO THOMASVILLE KITCHEN INSTALL | JCB and SONS
Erin, Ontario Thomasville Kitchen Install | JCB & SONS. We got the new Kitchen Sink all hooked up. We soldered in the new
shut offs for the new
Tap. The cabinets are now all installed along with the new countertops. We have started adding the trim board over top of the cabinets which will be finished with a crown moulding.
This is the new wooden Light Valence, it really makes the cabinets pop.
There will be an apron installed between the turned legs and a matching baseboard installed around the island.